For years there was a single dependable method to store information on a personal computer – utilizing a hard disk drive (HDD). Nevertheless, this type of technology is actually displaying its age – hard disk drives are noisy and sluggish; they can be power–ravenous and are likely to generate quite a lot of heat throughout intense procedures.

SSD drives, on the contrary, are fast, take in a lot less energy and are also much cooler. They furnish a completely new strategy to file access and storage and are years ahead of HDDs in terms of file read/write speed, I/O performance and also energy effectivity. Figure out how HDDs stand up up against the newer SSD drives.

1. Access Time

Image

SSD drives have a fresh & ingenious method to file safe–keeping according to the utilization of electronic interfaces rather than any sort of moving parts and revolving disks. This brand new technology is much quicker, permitting a 0.1 millisecond data file access time.

Image

HDD drives make use of spinning disks for files storage purposes. When a file is being accessed, you have to wait for the right disk to reach the correct position for the laser beam to view the file involved. This ends in an average access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Thanks to the very same radical strategy which enables for speedier access times, it is possible to experience much better I/O efficiency with SSD drives. They can perform twice as many operations during a given time in comparison with an HDD drive.

An SSD can handle at the least 6000 IO’s per second.

Image

Hard drives present reduced data access speeds because of the older file storage space and accessibility technique they are employing. Additionally they illustrate noticeably slower random I/O performance as opposed to SSD drives.

In the course of Bear Technologies’s lab tests, HDD drives maintained around 400 IO operations per second.

3. Reliability

Image

SSD drives lack any moving components, meaning there’s far less machinery within them. And the less literally moving components you can find, the lower the likelihood of failing are going to be.

The average rate of failure of any SSD drive is 0.5%.

Image

HDD drives make use of spinning disks for keeping and reading through info – a technology dating back to the 1950s. With disks magnetically suspended in the air, rotating at 7200 rpm, the prospect of something failing are usually increased.

The regular rate of failing of HDD drives varies among 2% and 5%.

4. Energy Conservation

Image

SSD drives function virtually noiselessly; they don’t generate extra warmth; they don’t call for more cooling down solutions and also take in way less electricity.

Tests have indicated the common power usage of an SSD drive is between 2 and 5 watts.

Image

HDD drives can be infamous for getting loud; they can be at risk of getting hot and if there are several disk drives in a single server, you have to have a further cooling system only for them.

In general, HDDs use up in between 6 and 15 watts.

5. CPU Power

Image

The faster the data file accessibility rate is, the quicker the data requests are going to be handled. It means that the CPU do not need to hold assets waiting around for the SSD to respond back.

The standard I/O delay for SSD drives is only 1%.

Image

If you use an HDD, you will need to devote additional time anticipating the results of your data file request. Because of this the CPU will remain idle for additional time, waiting for the HDD to react.

The typical I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

The majority of our completely new web servers now use simply SSD drives. Our very own tests have demostrated that using an SSD, the typical service time for any I/O request whilst performing a backup remains below 20 ms.

Image

In comparison to SSD drives, HDDs provide substantially slower service times for input/output queries. Throughout a web server backup, the average service time for any I/O call ranges somewhere between 400 and 500 ms.

7. Backup Rates

Image

An additional real–life improvement is the speed at which the data backup has been developed. With SSDs, a web server backup now will take under 6 hours implementing our web server–enhanced software solutions.

Image

We implemented HDDs exclusively for a couple of years and we have now decent understanding of precisely how an HDD functions. Creating a backup for a web server equipped with HDD drives can take around 20 to 24 hours.

The Linux VPS services as well as the typical cloud hosting accounts include SSD drives by default. Be a part of our Bear Technologies family, and find out how we could help you improve your website.


  • Service guarantees

  •  
  • Sign up now. There won’t be any setup costs you’ll also find total admin access to the server. 99.9% network uptime is guaranteed.
  • Compare our prices

  •  
  • Find out more about our prices and pick the perfect Virtual Private Server for your active sites. It is easy to migrate to a more feature–rich VPS plan with a click.
  • Compare our hosting plans
  • Contact Us

  •  
  • Contact us day and night by email or by utilizing the ultra–fast ticketing system. Our techs are prepared to reply to any questions in up to 60 mins.